1. Determine how many links to remove by trying the strap on your wrist. If you need to remove more than one link, ensure you take an equal number from both sides of the strap.
2. Take out the adjustment toolkit and unscrew the push-pin tool until it’s fully extended.
3. Place the strap in the toolkit, aligning the push-pin directly opposite the link you want to remove. Arrows on the strap indicate the direction to push the pin out, so position the strap accordingly.
4. Push the pin out to release the link. Most links have two pins, so repeat the process for the second pin. Once the links are removed, reconnect the strap by inserting the pin back into the remaining links.
To perform these steps, it’s essential to purchase a toolkit when ordering your strap. This makes adjusting the strap much easier and minimises the risk of damage.
Order the Watch Link Pin Toolkit to adjust your smartwatch strap!
To make things easier, we’ve included a video demonstrating how to adjust a steel strap. Good luck!
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.